Symphony V52 Flash File_5.1 Firmware 1000% OK Tested
Symphony V52 Flash File
Symphony V52 Firmware
V52 Flash File
Symphony V52 Flash File
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
Symphony V52 Flash File Official Firmware 100% Tested Flash File Download Link
Symphony V52 Flash File
Symphony V52 Flash File 100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
Symphony V52 Flash File 100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SPD Install ROM:
_______________________
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
