WALTON Primo E8 Flash File_6.0_S007_25032017 Firmware 100% Ok Tested File
WALTON Primo E8 Flash File _6.0_S007 Firmware
WALTON Primo E8 Flash File
WALTON Primo E8 Flash File
WALTON Primo E8 Firmware
WALTON_Primo_E8_6.0_Primo_E8_S007_25032017
WALTON Primo E8
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
WALTON Primo E8 Official Firmware 100% Tested Flash File
WALTON Primo E8 Flash file
WALTON Primo E8 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
WALTON Primo E8 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank.
WALTON_Primo_E8_6.0_Primo_E8_S007_25032017
Device Brand : WALTON
Device Model : Primo_E8
Device CPU : WALTON
Device IntName : Primo E8
Device Version : 6.0
Device Compile : 3/25/2017 1:53:22 AM
Device Project : Primo_E8_S007_25032017
Device ExtInfo : WALTON Primo E8
Device Model : Primo_E8
Device CPU : WALTON
Device IntName : Primo E8
Device Version : 6.0
Device Compile : 3/25/2017 1:53:22 AM
Device Project : Primo_E8_S007_25032017
Device ExtInfo : WALTON Primo E8
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
SPD Install ROM:
_______________________
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
FactoryDownload/UpgradeDownload/ResearchDownload
1 Unpack ROM and extract XXX.pac
2 Run UpgradeDownload or FactoryDownload or ResearchDownload, connect your android device to the computer
3 Click on "Load packet"and add the .pac
4 Click on "Start"
5 During the flashing your mobile will restart automatically
6 Finish
