SMILE Z10 FLASH FILE MT6580 6.0 OFFICIAL FIRMWARE 100% OK TEST FILE BY JamunaGSM
SMILE Z10_20HZGY_V117
Monkey Virus Problem,Pattern Lock Problem,Privacy Lock Problem Solution,
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
SMILE Z10 FlashFile Official Firmware 100% Tested Flash File
SMILE Z10 FlashFileFlash file Download link
SMILE Z10 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank,.
Privacy Protection,Data Auto Open,
Auto Application download,
Hang On Logo Problem Solve Firmware Write Restart Problem Solve In Firmware
Update
SMILE Z10 FlashFile Official Firmware 100% Tested Flash File
SMILE Z10 FlashFileFlash file Download link
SMILE Z10 FlashFile100% Working Tested
This Flash File Death Phone, Hang Logo, LCD Blank,.
File Version-
SMILE Z10 FLASH FILE MT6580 _6.0_20HZGY_V117
Info:
SMILE Z10_204HAGY_V117_20161202
version: 6.0
model: Z10
brand: SMILE
SMILE Z10_204HAGY_V117_20161202
version: 6.0
model: Z10
brand: SMILE
Install ROM:
Install with SP Flash Tool / SPD Upgrade Tool / Miracle / Cm2 / Others Tools
1). Turn off the smartphone. Cable is not connected to the computer.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
2). Remove the battery and insert it again
3). Connect your phone to a computer cable. The operating system detects a new device
4). Disconnect the cable from the computer.
5). Run SPMultiPortFlashDownloadProject.exe
6). Choose File> Open File Agent download and specify the file MTK_AllInOneDA.bin (it is in the folder SP_MDT).
7). Click Scatter File and select the _Android_scatter.txt file (it's in the folder with the rom).
8). Click "Start all".
9). Connect your phone to a computer cable. The program should see and blink. If the phone is not detected, then unplug it from the computer,
remove and insert the battery (if the battery is removable) and reconnect it to the computer.
10). After (OK) click Stop and disable any phone.
11). Completed.
